B
Burger
Is it sat flat? I’ve had a few cisterns recently where the hole was making the rubber washer curl at the side slightly due to poor manufacturing.
Discuss Leaking bottom inlet on toilet cistern. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Is a cheap suite and with good reason. The hole is not particularly level, have removed lumps and bumps but is I suppose on closer inspection expecting a single washer to work hmmm Hopefully the Stixall will sort it.Is it sat flat? I’ve had a few cisterns recently where the hole was making the rubber washer curl at the side slightly due to poor manufacturing.
Filled the slight unevenness in the casting with Stixall. Taking note of info on tube ie full curing 24 hrs per 1.5mm depth with attempt a fix sometime tomorrow. One should not have to do this but in this case the maxim " you get what you pay for" is totally spot on.It will!
Reply to Leaking bottom inlet on toilet cistern. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.