Discuss Kitchen Sink Mixer Taps Install. in the DIY Plumbing Forum area at PlumbersForums.net

Status
Not open for further replies.
Messages
6
Just looking for some advice, I have just fitted a new kitchen sink and both water pressures are the same in hot and cold on the mixer tap, both connected to tap flexies with shut off valves, however when hot is turned on it is not turning on the hot water for the boiler, previous sink had separate hot/cold taps. Boiler fires up ok for hot water from bathroom tap.

Any help appreciated.

Thanks
 
You havent mixed them up eg hot is cold ?
 
Had BG out today it’s a boiler fault, part being fitted Monday to remedy no hot water. Thanks to anyone that replied.👍😎
 
Unlikely if the bathroom hot works but closed 👍
 
Status
Not open for further replies.

Reply to Kitchen Sink Mixer Taps Install. in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
233
We have hot water, tank for hot water why is the hot water boiling hot from tap,and shower, We are on a schedule for hot water via our hive app...
Replies
4
Views
320
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
230
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
405
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
477
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock