Discuss kingfisher mf cfl40 problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

plumbtrust

Hi the wilo external pump wasn't running so I changed for a grundfos esp pump. Still doesn't run even though there is 240 v on both sides of strip at the boiler. I used the old flex but I'm sure these energy saving pumps usually come with their own black lead but Surely a lead is just a lead. Also changed board. Still nothing. Very confused. Thanks . Karl
 
Cant give advice on gas related appliances soz plumbtrust
 
Get post count up to 10 and contact a moderator Gasman or croppie and they will hook you up, if you are GSR,
 
Status
Not open for further replies.

Reply to kingfisher mf cfl40 problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
230
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
344
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
242
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
246
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
332
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock