Inverness Plumbers Arms member Plumber Gas Engineer Messages 710 Oct 17, 2018 #1 what do you guys set your anaylser at when servicing an oil domestic boiler?
Best Esteemed Plumber Subscribed Messages 10,034 Oct 17, 2018 #3 I know the print out on Testo states CO2 max possible (theoretical) with kerosine is 15.4 % So I must be set to kerosine. I hope I am on correct setting.
I know the print out on Testo states CO2 max possible (theoretical) with kerosine is 15.4 % So I must be set to kerosine. I hope I am on correct setting.
Inverness Plumbers Arms member Plumber Gas Engineer Messages 710 Oct 17, 2018 #4 This interesting.. I set it to light oil.
SimonG Esteemed Plumber Subscribed Messages 21,054 Oct 17, 2018 #5 Maybe depends on make of analyser as well?
Best Esteemed Plumber Subscribed Messages 10,034 Oct 17, 2018 #6 I know an Anton I once used was set on light oil.
SimonG Esteemed Plumber Subscribed Messages 21,054 Oct 17, 2018 #7 Mine's a TPI. I'll double check in the morning.
Inverness Plumbers Arms member Plumber Gas Engineer Messages 710 Oct 17, 2018 #8 Tpi good? How much for calibration?
SimonG Esteemed Plumber Subscribed Messages 21,054 Oct 17, 2018 #9 It does what it says on the tin. I was renting it from heating world of spares which included calibration. It's now mine and calibration is due in a month, son hopefully not too much.
It does what it says on the tin. I was renting it from heating world of spares which included calibration. It's now mine and calibration is due in a month, son hopefully not too much.