Search the forum,

Discuss jib pmes approved agency in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Andrew Hansell

hi all
Could anyone tell me who the jib pmes approved employment agencys are?.I am trying to get my green cscs card but when i soke to jib they told me i needed a letter from an employer but i am unemployed so this would be impossible to get.When i asked them about the approved employment agencies they said they did not know who they were.
 
you need a referee from a previous employer or an employer.

why are u applying for a green card? are you a plumbers mate?

what qualifications do you have?
 
just finishing tech cert level 2 at college and want to get on site as plumbers mate also want to do OSAT to get full nvq
 
Never heard anybody call it OSAT before.

bit of a catch 20,

You need an employer before you can get card, need card before you can get employed?

Do you know anybody who can act as a referee, plumber friend, i.e. or possibly college?
 
And if you are on 6129, you want trainee card, you must apply for the purple card, once completed the 6129 and you have employer for NVQ, you move to the red card (trainee/ apprentice), then when you complete NVQ2, you move to plumber blue card, NVQ3 gold card and so on.

Visit What cards are available?

to find out more.
 
gonna be green cscs card as havnt got employer to vouch for me but cscs said college can act as referee for me .As for OSAT it is to do my nvq on site but not sure whether a site manager would be happy with it if im only on agency it means onsite assesment and training
 
Bit confused, how can you be a labourer if you are not employed?
Labourer is somebody who works for somebody, not somebody at college.
 
Status
Not open for further replies.

Reply to jib pmes approved agency in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
152
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
363
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
313
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
210
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
242
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock