Immersion heater is working but no hot water coming through taps

[Millsy 82]

Have you tried turning the cold off?

 

[Gasmk1]

does your have any flow of water if not is your float valve stuck in the supply tank with no water in the tank no flow of hot. alternatively if you have only cold water coming out of the hot tap then you have a problem with either a mixer tap passing or a tmv faulty (i have my doubts about this one as it would have probably needed checking a few times over the year)

 

[SimonG]

Have you isolated the mains cold water and then tried the hot water?

 

[Harvest Fields]

I only have cold water

Out of both taps ( hot and cold)

 

[Gasmk1]

Then it's is down to either a faulty mixer tap passing or a TMV gone faulty

 

[centralheatking]

Ok, is it cold water coming out of hot tap, or is it no hot water flow
if the later the top nut might be rocked up. centralheatking

 

[Darren Jackson]

Is that bottom immersion heater wired up? from the picture it does not appear to be.
Is the water from your hot tap the same temperature as the cold tap water, or is it a tad warmer but not hot, just tepid?