Search the forum,

Discuss Ideal Logic heat 24 fan - cycles on and off all night (when in an off mode) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
Hi, I have an Ideal Logic Heat 24 boiler, but even when in off mode on the programmer, it constantly starts the fan up for a few seconds and then shuts down again. Any ideas please? Not good for light sleepers!
 
Best and easiest way is get a gas safe engy to have a look and maybe service the boiler

If your sure none of the programs are running
 
Appreciate that, but it's a new house, and the builders boiler engineer has serviced and confirmed the boiler is ok since we commented on this to them. I'd like to establish if this is normal though?
 
No not on a heat only boiler

Yes on a combi boiler (pre heat)
 
Thanks. it's a ideal logic heat 24 which heats an immersion tank plus the central heating so I'm fairly sure it's not a combi. It doesnt seem to be heating, just running an internal fan that's quite noisy (in the dead of night when directly above it). Any ideas why it would run?
 
Other than an anti seize function (which I'm sure the logics don't have)

Or maybe a frost stat kicking in but the boiler would fire / heat up
 
Do radiators get warm?
Is the hot water program off?
 
New build , very possible wiring fault but personally I would ring ideal up , the boiler is obviously under warrenty
 
Appreciate that, but it's a new house, and the builders boiler engineer has serviced and confirmed the boiler is ok since we commented on this to them. I'd like to establish if this is normal though?
If it is under warranty then I would just get the builders back. That is what you paid for in the first place. Peace of mind so that this did not happen. However like all new builds nowadays there is always something not quite right with them.
 
Status
Not open for further replies.

Reply to Ideal Logic heat 24 fan - cycles on and off all night (when in an off mode) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
182
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
173
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
355
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
526
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
276
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock