Ideal e type 60n

[lordyjordy111]

Hi all

was looking at this system today, pumped heating gravity hot water but cannot find the f&e tank??? just the cws tank in the loft????

surely it has an f&e

 

[Simon F]

have you checked the hot water cylinder?
assuming it is primatic, no f+e tank

 

[lordyjordy111]

must be primatic.... not sure how you would know just by looking at it.

anyway thanks for the help!

 

[stani]

Little bleed screw on side of cylinder

 

[diamondgas]

must be primatic.... not sure how you would know just by looking at it.

anyway thanks for the help!

Usually, but not always, F&R are fitted tighter together to the bottom of the cylinder, and there isn't an open vent or manual/auto vent attached to the gravity flow! You could also check the data sticker

 

[tamz]

Easy to tell by looking at the cylinder. The gravity revolves just connect straight to the cylinder. No feed or expansion teed off.