B
buffalo
About 7 years ago, I built a small block of 4 flats and installed Sime Format 100C combi boilers in each. On a recent annual Gas Safety check the engineer pointed out that I would soon need to replace the plastic flue terminals that protrude out from the exterior wall because they had become brittle and falling to bits.
Can I obtain these on their own or will I have to purchase 4 No. flue kits just to get hold of the terminals which is what I've been told by a supplier?
Will any brand of terminal be suitable providing the flue diameter is the same?
Thanks in anticipation.....Bill
Can I obtain these on their own or will I have to purchase 4 No. flue kits just to get hold of the terminals which is what I've been told by a supplier?
Will any brand of terminal be suitable providing the flue diameter is the same?
Thanks in anticipation.....Bill