Discuss Honeywell cm707 coming on when it shouldn't in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
7
We just moved into a new house with this thermostat and notice the radiators are warm in the middle of the night when heating shouldn't be on.

Does this thermostat have a setting where it will do this in preparation for when it is to come back on, I've seen this mentioned online but surely if its programmed to come off at 11 it should not come on again at 11.05?

It's definitely in Auto. Has anyone come across this?
 
I'm a bit puzzled, when you say off, surely the temperature should be lower ...
We were not sure so just put the off temp time to match the on, i googled and found a YouTube video who did that Have never had to choose a temperature for off with other thermostats we've had.
 

Reply to Honeywell cm707 coming on when it shouldn't in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Customer complained of hot water tank getting hot when no demand Y plan system couldn't see any issues so I watched it Timer set to CH only, HW...
Replies
13
Views
2K
Hi. I'm hoping for some advice. We have a very ancient thermostat for our radiators in a very old building. This morning there was no heat and...
Replies
6
Views
941
So I've used a wireless thermostat to activate my heating since installation, but it's just stopped working (Blank screen, no new battery's fixed...
Replies
0
Views
2K
I am generally a decent handyman, can usually make 2+2=4 and take care of most things to avoid troubling experts with just the basics, but know...
Replies
8
Views
966
A
Hi there, I am in urgent need of advice! The weather has plummeted over the past week so at nights its -6 so this may be the cause. Anyways, since...
Replies
1
Views
1K
Deleted member 120897
D
Back
Top