Discuss Help please! Dan Foss TP4000 series thermostat in the Central Heating Forum area at PlumbersForums.net

Messages
4
Hi. I'm hoping for some advice. We have a very ancient thermostat for our radiators in a very old building.

This morning there was no heat and the display was blank, so I've changed the batteries and reset, but I can't change the time to allow the program buttons to work.

After the reset, I get 3 displays in succession. The first says 03:00 Sr, then it quickly moves to 11:00:00 (but it won't let me change this, even if I press + or the up arrow really quickly). It moves on again very quickly to the 3rd display which just has a flashing colon, like the one in the middle of a time display but doesn't show any numbers and won't allow me to add numbers by pressing any of the buttons.

I have managed to change the temperature so the heating has come on but I won't be able to program until I can set the time. Watching the YouTube video Getting Smart with Dad didn't help and ringing DanFoss customer service didn't either. Are there any experts out there please? Thank you
 
Have you tried both resets?
 

Attachments

  • AFDC71F7-59A6-4CE0-90B0-28E5883E86D9.jpeg
    AFDC71F7-59A6-4CE0-90B0-28E5883E86D9.jpeg
    644.5 KB · Views: 8

Reply to Help please! Dan Foss TP4000 series thermostat in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Heating and hot water is not working. Plenty of heating oil. I have replaced batteries in thermostat and it seems to be working ok, showing flame...
Replies
5
Views
379
It was fitted with the boiler a Potterton Suprima 30L about 21 years ago. Two PCB's later and a new fan the boiler is working perfectly. However...
Replies
14
Views
1K
Hi everyone, I’m writing on behalf of my elderly neighbour and hoping this is a problem someone on this forum has experience of and remedied...
Replies
1
Views
454
H
Wishing everyone on tgmhis forum a very happy Christmas!! I am working on a combi boiler which has problem with heating only. Water is heating...
Replies
2
Views
352
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
241
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock