Currently reading:
Hissing pipes filling loop not working

Discuss Hissing pipes filling loop not working in the Central Heating Forum area at PlumbersForums.net

Messages
26
I hope you can give me some advice.
The day after a pump replacement last week, on my Halstead ace, the boiler and pipes made a hissing noise when the hot water taps were used - a noise like when the pressure is too low- this continued when the taps were turned off and until the boiler stopped running - usually about 3 minutes later.
I bled the radiators got a bit of air out from the ones upstairs -when topped up the pressure to 1.5 bar it stopped.

It started hissing again yesterday after using the hot water so I tried topping up the pressure, even though its not low- nearly 1.5 bar and the filling loop isn't making any water filling noise and the pressure gauge isn't rising either.

No air in radiators, is there any ideas? Thanks
 
This morning still hissing then I turned the hot water tap on, but weirdly it’s not doing it anymore only after I used cold water on washing machine And loo flushing. Is there an airlock which the cold water power temp cleared?
 

Reply to Hissing pipes filling loop not working in the Central Heating Forum area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock