Discuss High Flow Double Check Valves in the UK Plumbers Forums area at PlumbersForums.net

Marc Bowers

Gas Engineer
Messages
50
Hi all, I’ve a customer with a failed double check valve on a water softener, it’s 22mm compression but with a far larger bore than the usual DCV’s you see online. Anyone know if they are called something different or where I can get one? I’ve even been on the water softener website and they don’t seem to sell them. Ta.
 
You sure it’s not a 28mm dcv threaded end eg 1”-22mm male irons
 
That’s what I normally do

Another option is a swing check valve have to be installed horizontally tho
 
Is it the attached per chance?
 

Attachments

  • Screenshot_20221011_222602_com.android.chrome_edit_930449890086666.jpg
    Screenshot_20221011_222602_com.android.chrome_edit_930449890086666.jpg
    114.5 KB · Views: 19
Dear Marc, how did you identify the failed double check valve on a water softener? The inlet to our Harvey's softener has been making a clunking noise intermittently for 5 days now. Could it be the same problem as yours? Thanks so much for reply Sara
 
Dear Marc, how did you identify the failed double check valve on a water softener? The inlet to our Harvey's softener has been making a clunking noise intermittently for 5 days now. Could it be the same problem as yours? Thanks so much for reply Sara
My problem was flow rate. A clunking noise is usually water hammer and can have a number of sources (not necessarily in the area of the noise)
 

Reply to High Flow Double Check Valves in the UK Plumbers Forums area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock