Discuss help on a 105HE in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

chunkauli

hi guys a bit of advice please

i have a baxi 105HE having intimate hot water issue it is flashing 70 which means fault on hot water sensor i have just changed the diaphragm but it is still doing it the only other cause which i believe is the thermistor or a block on the heat exchanger , can you guys shed some ideas for me to try and investigate??
 
:D are you gas safe if your not naughty naughty time to get a gas safe eng in
 
thats right no does it mean i cant work on my own boiler in my own hose ??
 
thats right no does it mean i cant work on my own boiler in my own hose ??

unless your gas safe you cant work on any gas appliance
 
i used to work for a company that was corgi registered and i'm competent enough to work on my own boiler ..is it still illegal ? i always thought it was ok ,thats what my service engineer said
 
i used to work for a company that was corgi registered and i'm competent enough to work on my own boiler ..is it still illegal ? i always thought it was ok ,thats what my service engineer said

nope as i have said you cant work on any gas appliance unless your gas safe not even your own
 
Status
Not open for further replies.

Reply to help on a 105HE in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
143
Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec boiler. Basically, the hot water temperature has...
Replies
5
Views
501
I have a Worcester Greenstar gas boiler circa 2017. There has been a noise coming from the boiler which resembles running water, I have checked...
Replies
2
Views
173
A
Hey, here goes and I hope it works.. never used one of these before! I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar...
Replies
1
Views
442
  • Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running. Monitoring...
Replies
3
Views
354
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock