Discuss Hansgrohe or Axor Mixer tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

Fixer

Having trouble sourcing parts for a suspected Hansgrohe or Axor kitchen mixer, if anyone recognises the tap can they give me the make and model and or an indication where I might get a spare handle which has snapped off, will try and attach pics
many thanks
 

Attachments

  • IMG_0670.jpg
    IMG_0670.jpg
    95 KB · Views: 16
  • IMG_0669.jpg
    IMG_0669.jpg
    97.5 KB · Views: 16
  • IMG_0668.jpg
    IMG_0668.jpg
    79.5 KB · Views: 17
Having trouble sourcing parts for a suspected Hansgrohe or Axor kitchen mixer, if anyone recognises the tap can they give me the make and model and or an indication where I might get a spare handle which has snapped off, will try and attach pics
many thanks

I’d talk to Hansgrohe or get a new tap.
 
Have emailed Hansgrohe with no response yet, there is another identical mixer tap in the kitchen so would mean replacing two taps to match up which the owner is obviously not keen to do....
 
Damn close Tom, if nothing else this would be a good replacement, thanks for the link mate

Brian
 
Status
Not open for further replies.

Reply to Hansgrohe or Axor Mixer tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Replies
12
Views
433
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
240
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
285
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
271

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock