Discuss Hansgrohe Kitchen tap installation problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Go to a merchants and ask for 15mm to 10mm compression reducers

Or a couple of 10mm sets
 
As Gray0689 says head down to your local merchants, take the tap just to be sure.
 
Your taps are complete. They don't come with adapters to 15mm copper.

you will need two of these.
Reducing Coupler Compression Fitting 15-10mm | Compression Coupling | NoLinkingToThis
 

Attachments

  • image.jpg
    image.jpg
    14.8 KB · Views: 13
Status
Not open for further replies.

Reply to Hansgrohe Kitchen tap installation problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
160
Sonya K
S
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
444
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
339
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock