Hansgrohe Kitchen tap installation problem

[madoleo]

Hi

I got a Kitchen tap - Hansgrohe Talis S 32851000. When I started removing old tap I have noticed, that it has unusual fittings. I got it off ebay, so I thought it might be a product for a different market than UK. When contacted seller I was told that it was purchased in uk from some company and had some spare ones. Anyway, can anyone advice if there is any chance to have it fitted with standard UK connectors?
For some reason I am not allowed to post link or photograph, hopefully it will let me do it with next post.
Edit.

After some research it seems that my set is missing some screws that goes on top of the hoses. Will try to get them from the seller, but he claims he doesnt have them.
If I only had a chance to post a photo of what I've got.


Thanks in advance for any help.

 

[Destroyer2813]

Probably 12mm nuts on the end of the hoses , use 2x 15x12 compression reducers

 

[Mike Jackson]

 

[village idiot]

The benefits of buying online?
At least he admits that you are missing the said parts. Some would claim everything was delivered

 

[village idiot]

The benefits of buying online?
At least he admits that you are missing the said parts. Some would claim everything was delivered

 

[madoleo]

Thanks for posting my photo. Any advice guys?

 

[Gray0689]

10mm sets
Or 15mm to 10mm compression reducers

 

[SimonG]

Grohe taps have 3/8th flexis. I always carry a couple of 3/8th to 15mm mi's.

 

[Gray0689]

Grohe taps have 3/8th flexis. I always carry a couple of 3/8th to 15mm mi's.

Most do but not all the OP is 10mm

 

[madoleo]

Is it widely available? Would appreciate any links to the reducers I am looking for.