Search the forum,

Discuss Grohe i-box . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
A pals just rung me up , yesterday he bought a Grohe i-box for a up coming job for yours truly.
I have never fitted one but have heard they are a nightmare to fit but I am more worried that I have heard they are mainly intended for unventeds .
Anybody any experience with them ...
Thank you in advance
 
I have fitted loads of them with no issues at all. What problems have you heard of then?

Cheers thats good to hear , a pal fitted one last year and said they were over complicated, it was a shower / bath filler. Ok off a combi would you say ?
 
Cheers thats good to hear , a pal fitted one last year and said they were over complicated, it was a shower / bath filler. Ok off a combi would you say ?
Definitely no issue with combi and no issue to fit. Very straight forward and very reliable.
 
No problems whatsoever. Just make sure to read (digest pictures as no words) the instructions and understand them. They are an excellent idea and work very well.
 
Status
Not open for further replies.

Reply to Grohe i-box . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
115
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
251
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock