Search the forum,

Discuss Good or bad idea - would you like it and be Interested in? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Ron can I step in as peace maker you are digging a big hole here mate please don't jump in , Harvest and the other engineers are only trying to help you out it may come across as negative criticism but be assured we know what's right and what's wrong , posting pictures of your work on here leaves you wide open to criticism I know this from past experiences but please don't see it as us ganging up on you, we as gas engineers have a duty to ensure that life and property is protected If there's a issue regarding the fittings you have used and I am not saying there is ! please , please address the problem and if not and your 100 per cent sure that your install Meets all the gas regulations then that's the end of it . Regards kop
Appreciate what you are saying and agree with you. I definitely installed the right fittings with the right rubbers and have nothing to worry at all. It's better not to upload anything so it won't cause any problems next time. I appreciate your step in and I'm glad we finished that subject now.
 
New posts

Reply to Good or bad idea - would you like it and be Interested in? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
190
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
249
Show us your fanciest radiators you've installed! We would love to see them! I love this Milano vertical radiator in the kitchen space. What do you think?
Replies
4
Views
194
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
174
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
137
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock