GONNA hAVE FUN FITTING THIS BADBOY

[ashtonjay]

Honestly never fitted onw of these "Geberit Sigma Toliet with hidden cistern"

ripped a few out !!

any tips? they look a bit fiddly :wink_smile::wink_smile:

cheers in advance

[h=1][/h]

 

[Whn1]

My mistake, Simons right here.
just measure and offer things up a million times, fit it all dry first if your unsure.

 

[ashtonjay]

will do

its seems like a bloody big flush plate to have to put such a big hole in the tiles?

i have changed a few syphons on these its like playing jenga through a bloody letterbox

 

[kozak1968]

Easy to fit. The brackets on the sides have a wedge which snaps in so that it can be set at right depth. Problem is the teeth wear off and the cistern slides back. Put a PK screw in each side of bracket to stop it moving. Also check the thickness of wall, if its 75mm stud in front of cistern the rectangle tube may be too short to fit face plate on.

 

[thompsonbrown]

easy to fit and are very reliable i always use big washers on the brackets and use a flex tap conn on the cold feed.