Discuss GLOWWORM 800869 GAS VALVE 100F HONEYWELL VR4601 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
Anyone got a gas valve for a fuelsaver 100f as per above. System is linked to a log burner so would like to fix the old girl as shes only 30 years old
 
Hi folks I located a NOS valve so all sorted. I am reluctant to fit anything modern on such an old dirty system so the repair will buy some time till they (can afford) !!! to do the job properly. What I would like to know is how this old girl detects that the pilot is lit? it is not the same as the GW BBU of the same era as there is no TC
 
Hi folks I located a NOS valve so all sorted. I am reluctant to fit anything modern on such an old dirty system so the repair will buy some time till they (can afford) !!! to do the job properly. What I would like to know is how this old girl detects that the pilot is lit? it is not the same as the GW BBU of the same era as there is no TC
pcb picks up pilot thru flame rectification
 
pcb picks up pilot thru flame rectification
I thought that but never knew any boiler had that in 1989 when this was fitted (very good job though)). Its a dirty system that works as it does linked with a neutralizer. Pray for me when I fit a condensing boiler in the future
 

Reply to GLOWWORM 800869 GAS VALVE 100F HONEYWELL VR4601 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
Rad is only a few years old. Paint is flaking away at the top curved section and it looks like faint spots of rust where the rad is now bare.
Replies
3
Views
259
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
221
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
283
PSxxxxxx
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
452

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock