Search the forum,

Discuss Gas Trainee job wanted!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
38
Hi 31 years old Living in Wandsworth


I have completed C&G Level 2 in plumbing and currently studying NVQ Level 3 Gas Engineering at the College of North West London.
I am a hard working keen employee with 14 years management skills I can work well as a team or as an individual always looking to further my career, now after 3 years at college I'm looking for my first job in the gas/plumbing industry.
Do you have any full or part time vacancies i have included my cv and can provide references on request.
I can start as soon as possible


Thank you Dean Savva

Dean Savva
 
Hi Dean, Welcome along, Lots of requests on here for employment, see you have 3 years at collage , but what experience have you had ? and why pick plumbing to get into ? thought I saw Pimlico plumbers advertising for Trainees / Mates, have you tried them ? What you been doing for last 14 years ? Office work to Building industry ! whole different ball game, out in all weathers , hands in all sorts of S--t, people moaning at you, rubbish working conditions most of the time, and the pay is not much better, But it's your choice , Best of luck for the future,
 
Status
Not open for further replies.

Reply to Gas Trainee job wanted!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
440
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
185
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock