Search the forum,

Discuss Gas Forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

EPH

Plumbers Arms member
Plumber
Messages
1,182
Has it moved or have I never been a member, I'm confused
 
Has it moved or have I never been a member, I'm confused

Nope but also you don't have a gs reg badge ask gas/ email your reg number (ask crop for the email)
 
Just checked my inbox I've tried that, I'll give it another go.
 
I'll have to try and find it now!!

Shaun how fa North are you?
 
I'll have to try and find it now!!

Shaun how fa North are you?

Wrexham area normally do 40 miles all round :D
 
You're out of my area then!!

saw a job in Abergele on here earlier, that's a bit out of your way I guess.

Yea saw that as well, you do great work btw
 
Cheers Shaun, always good to get feedback from other engineers.

Feel free red to leave a few likes on my Facebook page haha

Not a problem, good work always stands out
 
Status
Not open for further replies.

Reply to Gas Forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
37
B
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
451
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
185
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
257
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock