Search the forum,

Funniest ebay advert in ages

Post new thread

Discuss Funniest ebay advert in ages in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Status
Not open for further replies.

Reply to Funniest ebay advert in ages in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
BSP female fine for BSP male? Need T for Esp-Vessel.
In short: Do suppliers sometimes list BSPT as BSP? I need a tee, 22mm each end with a BSPT in the middle for an expansion vessel to dangle from. Why I think its I've used calipers on the threads and counted them, and the male end sticking out of the vessel is BSPT 3/4 with 14 threads per inch...
Replies
2
Views
371
DannyNotAPlumber
D
O
brass, stainless, or EP/plastic for Well service line fittings
Where the black polyethelene service line enters this particular structure is by far the most freeze-prone area. The structure is an elevated "mini house" with an insulated, heat-taped plenum taking the poly from below frost line up into the space between floor joists. But, power outages...
Replies
0
Views
383
ohnoflood
O
D
Soldering poorly fitting joint - pipe not round, good fill, how?
Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with elbows), the last cm before the open end is pretty much straight, but as a result of the bend it is not perfectly round. I mean it is pretty much...
Replies
14
Views
1K
gmartine
gmartine
Stigster
Cold booster sets
Hi Everyone, For those who like a long read but I could rally do with some advice. Might be a bit long this. For background. A gardener/landscaping friend of mine is going to install an irrigation system in a customer's garden. He asked me to pop around and measure the pressures and flowrates...
Replies
3
Views
275
ShaunCorbs
ShaunCorbs
N
Replacing Standpipe Trap under sink - Dishwasher
Hi, I have an issue with the standpipe trap in a 3-year-old flat. This flat came with a fitted dishwasher that has been completely unused for that time – until now... The weekend before last, I thought maybe it was about time I tested it out running empty – it all worked fine and it drained ok...
Replies
6
Views
956
nigelp
N
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
Plumbing Advice
Tilers Forums UK
Contractor Advice Forum
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock