Search the forum,

Foreign Taps

Post new thread

Discuss Foreign Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bartlettpandh

A customer of mine has bought a monoblock kitchen mixer tap from ebay and asked me to fit it. Upon inspection the fittings are 12mm not 15mm. Has anyone got any suggestions where I can find a 12-15mm conversion. All I have found so far is a 15-12 reducer which is no good for me as it has a female threaded connection and the monoblock connection hoses available off the peg are too large for the tap.
:confused:
Answers very welcome
 
any plumbers merchant like plumbcentre have 12 x 15mm couplers.
 
Many thanks for that now i have got something to aim for in the morning, as usual these things always crop up late on a Saturday.
Cheers:)
 
Status
Not open for further replies.

Reply to Foreign Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
365
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
217
SimonG
SimonG
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
210
dreikher
dreikher
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
262
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Tiling News
Tiling Tools
UK Tiling News
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock