Search the forum,

Discuss Easyfit isolators in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Wirralplumber

Gas Engineer
Messages
10
Has anyone got any experience with these easyfit isolators? Looks like a good idea but I'd like to know if anyone has fitted any and what they think
 
I have one in the van as a last resort.
the idea is good.
never as yet had to use it.
Be interesting to know how easy they are to fit and reliability.
 
Same here. Got one on the van but always managed to isolate, freeze or snatch...
 
Do you know if anyone has had any call backs with them? I always have a pain in a local med Center I do work for with the ISO valves leaking, this would be ideal, if I can trust it
 
Do you know if anyone has had any call backs with them? I always have a pain in a local med Center I do work for with the ISO valves leaking, this would be ideal, if I can trust it

Our in warranty return rate is less than 1% if that helps. From looking at the returns data, it seems to be drips and weeps that cause the odd return. We don't have any recorded case of a catastrophic failure.

To be fair though, our sales records cover hundreds rather than thousands of sales, and therefore the statistical universe is not as great as I would like to give a really solid opinion.
 
The bloke uses 2 different tools, 3 different screw bits including the isolator that comes in 4 parts I am not at all convinced that during an emergency I will be able to get hold of all these bits from my van and not lose my mind trying to assemble this.
 
Status
Not open for further replies.

Reply to Easyfit isolators in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
264
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
309
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
383
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
729
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock