Search the forum,

Discuss DROPBOX ISSUE,,, BRITISH STANDARDS, IGEM , TBS ETC in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

kris

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,744
Hi folks like the heading says im having problems with accessing my dropbox which is full of gas related standards, tbs bs and igem ,, i know theres some in the gas safe private forum but the big lists have gone, croppie had loads there so think there gone, i remember a year or so ago we did talk about makig a type of library and keep it up to date with reg changes and updates for engineers to access and view or print if neccassary but nothing ever came of it , i know gas safe does it as i paid them 75 per year but couldnt print them off but had most in my dropbox anyway but im having problems with my dropbox so wondering if anyone has most of the info in question , preferebly big list not singles lol, any help be much appreciated folks
 
Hi Kris, unfortunately I cannot help you with all the stuff but I am sure there are few people here to help you out as soon as they read it.

Good luck
 
Status
Not open for further replies.

Reply to DROPBOX ISSUE,,, BRITISH STANDARDS, IGEM , TBS ETC in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
119
B
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
25
B
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
438
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock