Search the forum,

standards

A standards organization, standards body, standards developing organization (SDO), or standards setting organization (SSO) is an organization whose primary function is developing, coordinating, promulgating, revising, amending, reissuing, interpreting, or otherwise producing technical standards to address the needs of a group of affected adopters. Put another way, such an organization works to create uniformity across producers, consumers, government agencies, and other relevant parties regarding terminology, product specifications (e.g. size, including units of measure), protocols, and more. Its goals could include ensuring that Company A's external hard drive works on Company B's computer, an individual's blood pressure measures the same with Company C's sphygmomanometer as it does with Company D's, or that all shirts that should not be ironed have the same icon (an iron crossed out with an X) on the label.Most standards are voluntary in the sense that they are offered for adoption by people or industry without being mandated in law. Some standards become mandatory when they are adopted by regulators as legal requirements in particular domains, often for the purpose of safety or for consumer protection from deceitful practices.
The term formal standard refers specifically to a specification that has been approved by a standards setting organization. The term de jure standard refers to a standard mandated by legal requirements or refers generally to any formal standard. In contrast, the term de facto standard refers to a specification (or protocol or technology) that has achieved widespread use and acceptance – often without being approved by any standards organization (or receiving such approval only after it already has achieved widespread use). Examples of de facto standards that were not approved by any standards organizations (or at least not approved until after they were in widespread de facto use) include the Hayes command set developed by Hayes, Apple's TrueType font design and the PCL protocol used by Hewlett-Packard in the computer printers they produced.
Normally, the term standards organization is not used to refer to the individual parties participating within the standards developing organization in the capacity of founders, benefactors, stakeholders, members or contributors, who themselves may function as or lead the standards organizations.

View More On Wikipedia.org
  1. S

    Building Regulations Compliance Certificate

    The self-certification certificate states that "....the work was carried out in accordance with Gas Safety (Installation and Use) Regulations, as well as other relevant industry standards" I would be very grateful to know what you think "other relevant industry standards" are, please? Also...
  2. blangotti

    NHBC Flow Rates Standards (8.1.5)

    Hi, I have a question related to NHBC flow rate standards. Does this standard apply when using a flow regulator? I have a new building without sufficient water flow while using the outlets simultaneously. But the builder insists that it is according to NHBC guidelines and the low flow is because...
  3. H

    Need a consultant / surveyor to confirm PCA standards.

    Hello, Our block of flats has had some stormwater drains replaced. We are concerned that the work does not meet the PCA standards. For example, the pipes are just below the surface soil and are even visible when there is some light rain. There are also some concreting issues. We would like a...
  4. J

    Access to British Standards

    HI there. Just wondering if anyone knows whether it's possible to access British Standard documents through BSOL(British Standard Online) at home? If so how much is membership? If no, then which libraries offer access to these documents? I'm based in London. It would litereally be several...
  5. L

    Ideal Standards toilet, part required?

    I'm hoping some informed soul may be able to kindly point me in the right direction. - Ideal Standards toilet, though there is no obvious indication of specific model number. Photo included, if it helps. - Upper part of flush mechanism has sheared off, per photos. To my untrained eye, what I...
  6. kris

    DROPBOX ISSUE,,, BRITISH STANDARDS, IGEM , TBS ETC

    Hi folks like the heading says im having problems with accessing my dropbox which is full of gas related standards, tbs bs and igem ,, i know theres some in the gas safe private forum but the big lists have gone, croppie had loads there so think there gone, i remember a year or so ago we did...
  7. Dan

    British Standards in Plumbing, for FREE!

    http://www.tilersforums.co.uk/tiles/tiling-standards/ If you checkout that blog post I did, you'll find out how to get the British Standards for Plumbing for free. It talks about Tiling Standards, but it applies to Plumbing too. Which actual BS numbers apply to plumbing?
  8. R

    Asbestos vacuum cleaners

    Before I say anything else, I want to make it clear I do not hold an asbestos qualification and I refuse to touch the stuff professionally. However, my father said he'd pay for me to buy the vacuum cleaner as I need to take up some old asbestos Marley tiles and probably remove some Artex (I've...
  9. T

    Relocating Rainwater Vent Pipe Trap - Building Standards

    (Apologies for the double post. I originally posted this in the Valves & Taps section but I dont think that was correct) Hello I am currently assisting with the renovation of a medium sized house which involves converting the existing kitchen area into a new bathroom (Kitchen is being...
  10. T

    Relocating Rainwater Vent Pipe Trap - Building Standards

    Hello I am currently assisting with the renovation of a medium sized house which involves converting the existing kitchen area into a new bathroom (Kitchen is being relocated to the existing dining area). Building standards have sent me a drainage record of the house from 1955 which...
  11. S

    Boiler Gas flue pipe

    If the gas fitter failed to secure the boiler gas flue pipe joints with screws , would this be classed as an AR (at risk) or NTCS (not to current standards) defect? Also if the gas fitter used the wrong gas flue pipe system and used a gas flue externally that was only made to be used...
  12. D

    In my Opinion - Very Poor Plumbing Standards

    Hi, I'm not Plumber. What I am is an electrical, electronic and mechanical engineer of 35 years experience. I recently invited a Plumber of, so he says, 20 years standing into my home to plumb in a en-suite shower room and toilet. The resulting (In my opinion) mess, and pipe pipework, has...
  13. M

    British standards & Gas regs?

    Hi all. Where can I get copies of the above documents please?
  14. J

    Standards on Gas pipe

    Can I have some opinions on the following scenario? I have been asked to quote for replacing a R/S non condensing boiler with a condensing combi boiler. The gas supply pipework is fine for the size of the boiler, however the 22mm pipework passes through two brick walls and is not sleeved. At...
  15. P

    ACS revision materials and standards changes

    Hi Guys, Just a quick question really I was wondering does anyone have any ACS revision materials and what are the best books(currently have corgi 5th addition) with the latest standards changes in them? I know there is only one closed book(which was easy last time) but I just wanted to be a...
  16. E

    Ever had trading standards called ?

    Got threatened today when one of our lads replaced non working 837 with 40kw platinum. The 26m 500 elbow gas run with six burner hob was a little low at gas valve (14mbar) 22mm. The previous "gimp" had made a lovely mess of the system to combi. Turns out it was a valliant subby as custard paid...
  17. M

    Bristish standards

    right guys, i can get bristish standards for free, though my college. what bristish standards would come in handy? secoundly if any of you need some let me know? cheers
  18. C

    Biomass RHI

    Afternoon folks, advice needed, I want to head my company down the biomass install market at the moment, I've been involved in district heating and biomass install but I want to be able to certify and be involved in the whole project rather than just parts, what's required by my company to...
  19. Reg Man

    TV standards

    I may be maturing into an old git, just like my Dad was; worrying; but this modern day TV, thankfully only free view, but cannot find anything other than crap. In early years; have to admit, remember BBC2 and ITV 4 coming on stream, there were some great programs; Now it's mainly rubbish. So in...
  20. E

    Regulations and standards

    Well my 5 years is nearly up and time for my exams again.... Anyone know a site where I can download standards and regulation for free?
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock