Discuss Denso tape on waste pipe join? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

J

John Mc

When connecting a plastic metric waste pipe from a bath to a metal imperial pipe in the wall is it standard practice to use denso tape on the outside of the join? Does it stop potential leaking or movement?
 
Thanks for getting back to me. Hoping that denso is being used as a belts and braces approach but seems strange. This is the second bathroom I have seen with this construction method. Wood blocks any better than pipe clips or is this another non-standard/poor practice?
 
Last edited:

Reply to Denso tape on waste pipe join? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down...
Replies
2
Views
171
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
240
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
304
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
321
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
162
Sonya K
S
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock