Cp12

[topdog]

Hello everyone,
Did a landlord safety today, just a query regarding kitchen wall units from gas hob,
Should be a minimum distance of 460mm from Worktop to underside of wall cabinet, but was 25mm short. (435mm).
What would the experience people on here do in this situation,
any help or advise would be appreciated, Just want to cover my back or am I being too fussy
Many Thanks
John Paul Wolfe
topdog

 

[Atouchofgas]

Any heat damage to the units ? If not I would Ntc it

 

[Rob Sale]

Just hand them a AR warning notice to cover your rear.

 

[mfgs]

Any signs of distress and its AR, if there isn't any then its NCS.

 

[Rob Sale]

If there were sign of scorch marks then it's ID.

 

[topdog]

Thanks everyone, No signs of distress, but being a kitchen fitter and know a gas engineer,
Things like this worry me...If anything ever happens to them.
Also had to shut off their gas fire. SEE PIC....REAL PEBBLES USED
Will take your advise Rob Sale, just to cover my behind.
Many Thanks again Guys & Dolls
topdog

SEE PIC....REAL PEBBLES USED. Customer said why are you cutting my fire off (LOL).

 

[Rob Sale]

Do you have a viper book? as its in there.

 

[mfgs]

If there were sign of scorch marks then it's ID.

Its AR according to the unsafe situations book that I have. You certainly cant go round At Risking hobs with incorrect clearances and no signs of distress, by your logic every NCS becomes AR to cover yourself.

 

[Rob Sale]

Its AR according to the unsafe situations book that I have. You certainly cant go round At Risking hobs with incorrect clearances and no signs of distress, by your logic every NCS becomes AR to cover yourself.

you just contradicted yourself there, by proving that I was right by saying it was AR according to you unsafe situations book.

 

[buckley plumb]

Hello everyone,
Did a landlord safety today, just a query regarding kitchen wall units from gas hob,
Should be a minimum distance of 460mm from Worktop to underside of wall cabinet, but was 25mm short. (435mm).
What would the experience people on here do in this situation,
any help or advise would be appreciated, Just want to cover my back or am I being too fussy
Many Thanks
John Paul Wolfe
topdog

do you mean hob to bottom of cupboard unit should be 760mm not 460

 

[topdog]

do you mean hob to bottom of cupboard unit should be 760mm not 460

760mm is from the bridging unit directly above the hob
The units left & right of the bridge unit is 460mm from worktop to bottom of units.
Many Thanks
topdog
In my gas safety handy guide its AR if signs of distress, if No signs then its NCS......
Until they put a chip pan on it & then what....LOL

 

[kirkgas]

do you mean hob to bottom of cupboard unit should be 760mm not 460

460 min from work top to bottom of wall unit IF wall unit edge is in line with edge of hob, if less than 460 then wall unit edge should be 50mm back from edge of hob
760 is min height above hot plate to combustible material

 

[topdog]

Out of my NICEIC on-site guide
Many Thanks to everyone
topdog

 

[mfgs]

you just contradicted yourself there, by proving that I was right by saying it was AR according to you unsafe situations book.

No, its AR with signs of distress. No signs of distress then its NCS

 

[Rob Sale]

There is nothing wrong airing on side of caution though, that what i was tuaght.