Search the forum,

Discuss College interview :s in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

Jr4300

Hi guys

anyone done the screening test recently? I think i will be ok with the english but not so sure on the maths

I've tried to get my gcse grades from school but cant get through and wont get them before wednesday evening (screening time) so ill have to take tests

any info much appreciated

regards
 
if you cant add up you arent going to be able to charge your customers so best stick to shelf stacking. If that not an issue try 360/72x 10.775, if thats all right you can gas rate but most of all can you stick 20% mark up on £1742 , if not youll never make enough money. Its not rocket science just arithmatic
 
Percentages i can cover (with a bit of thought)
mental arithmetic im semi-ok with
volume of a cylinder i can do just about

thats about it from memory lol
 
if you cant add up you arent going to be able to charge your customers so best stick to shelf stacking. If that not an issue try 360/72x 10.775, if thats all right you can gas rate but most of all can you stick 20% mark up on £1742 , if not youll never make enough money. Its not rocket science just arithmatic

Your spelling ?
 
Status
Not open for further replies.

Reply to College interview :s in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
198
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
244
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock