Discuss Clipped my wing mirror today.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
D
dave1
Ouch that's an expensive mirror to fix.
R
Rickster123
Yes officer of course I was travelling at the legal speed limit....:biggrin5:
B
Billy Bob Bob
fair play,you dont do things by half
C
Ch4 plumbing
You must have been travelling at some speed mate? Expensive bit of glass ay?
New traffic and was going about 25-30mph.
It's along a road that people tend to drive in the middle of even though there's enough space for two. I pulled across a bit to much because of some ****wit and next thing I know it was like a bomb went off!
About £300 to sort it by the time I pay the excess on the glass replacement.
Not a great day really.
It's along a road that people tend to drive in the middle of even though there's enough space for two. I pulled across a bit to much because of some ****wit and next thing I know it was like a bomb went off!
About £300 to sort it by the time I pay the excess on the glass replacement.
Not a great day really.
C
Ch4 plumbing
What's the new Traffic like?
R
REDSAW
scrap..
It all seems O.K, no faults so far, had it for about 10 months. Nice to drive, not as economical as I was hoping for but I think it's getting better the more miles I do.
I chose it over a transit custom as it had everything I wanted but with a bit more space than the custom, coming from a MWB semi high transit.
I'm also not keen on the dashboards in the fords, a bit fiesta like and could look quite tatty over time.
I chose it over a transit custom as it had everything I wanted but with a bit more space than the custom, coming from a MWB semi high transit.
I'm also not keen on the dashboards in the fords, a bit fiesta like and could look quite tatty over time.
R
Rickster123
Haha 25-30 my arse!! I used that same line when I was 17 and wrote off 6 parked cars in a crash. "I swear dad I was doing like 25-30...."
Bugger?
N
newcastle phill
What did you clip - the terminator !!!
- Status
Reply to Clipped my wing mirror today.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi
I had to remove the glass panels from this quadrant shower cubicle and I'm struggling to get one of the screens back in place properly. The...
Hi all
Plumber who fitted shower frame didnt put sealent behind frame to tray before fitting frame.
Now leaks when water gets into frame and...
Hi!
Hoping for a bit of help!
Thought I had an easy job of changing my toilet seat however it seems to be more challenging than I thought.
It...
I've air tested pipework for years, typically 4 bar for 30 minutes. I've never had an issue with any pipework that has passed that test...
Hello, the edge of the end of my bathtub leaks when I am about 3 minutes in the shower. The faucet is on the opposite side. What could be causing...