Search the forum,

Discuss Clipped my wing mirror today.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Nostrum

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,399
A bit of a shock when I got showered in glass. The actual mirror ended up in the van!

image.jpg
 
You must have been travelling at some speed mate? Expensive bit of glass ay?
 
New traffic and was going about 25-30mph.

It's along a road that people tend to drive in the middle of even though there's enough space for two. I pulled across a bit to much because of some ****wit and next thing I know it was like a bomb went off!

About ÂŁ300 to sort it by the time I pay the excess on the glass replacement.

Not a great day really.
 
New traffic and was going about 25-30mph.

It's along a road that people tend to drive in the middle of even though there's enough space for two. I pulled across a bit to much because of some ****wit and next thing I know it was like a bomb went off!

About ÂŁ300 to sort it by the time I pay the excess on the glass replacement.

Not a great day really.

What's the new Traffic like?
 
It all seems O.K, no faults so far, had it for about 10 months. Nice to drive, not as economical as I was hoping for but I think it's getting better the more miles I do.

I chose it over a transit custom as it had everything I wanted but with a bit more space than the custom, coming from a MWB semi high transit.

I'm also not keen on the dashboards in the fords, a bit fiesta like and could look quite tatty over time.
 
Haha 25-30 my arse!! I used that same line when I was 17 and wrote off 6 parked cars in a crash. "I swear dad I was doing like 25-30...."
 
Status
Not open for further replies.

Reply to Clipped my wing mirror today.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
236
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
228
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock