Cast iron 21/2 inch access pipe

[Anna D]

This is a brand new pipe, but the access plate can't tighten as the bolt thread seems to be miscast. Any remedy or should I get co back?

 

[rpm]

Call them back as it`s brand new. There is a remedy but why should it cost you to make good?

 

[Unregistered]

Thank you, will do. Out of interest what is the remedy, so I can check it with what they offer.

 

[rpm]

Thank you, will do. Out of interest what is the remedy, so I can check it with what they offer.

Either replace the bolts if the threads are damaged which is unlikely, use shorter bolts if they are going into a blind hole and touching the bottom or some people will use a thicker gasket if there is one which is ok as long as it seals or re thread the holes.

 

[Unregistered]

Thanks!