Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Can't reply to my own thread... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Stop being melodramatic. Because you are a newbie your posts are held in a moderation queue until one of us spots them.

We are allowed to eat, shower, go to the loo and work etc. You might not believe it but none of us get paid for this. But somehow we've managed to make this the number one plumbing forum in the UK and number two in the world. Not bad for a 'flawed' forum eh?

One of the things that make us number one is the fact we put vigorous measures in place to protect ALL our members, new and old. One of those measures is the moderation queue.

But then, if you don't like the fact we are conscientious and care for our members. ..........
 
Last edited by a moderator:
Stop being melodramatic. Because you are a newbie your posts are held in a moderation queue until one of us spots them.

We are allowed to eat, shower, go to the loo and work etc. You might not believe it but none of us get paid for this. But somehow we've managed to make this the number one plumbing forum in the UK and number two in the world. Not bad for a 'flawed' forum eh?

One of the things that make us number one is the fact we put vigorous measures in place to protect ALL our members, new and old. One of those measures is the moderation queue.

But then, if you don't like the fact we are conscientious and care for our members. ..........

Apologies, none of this is obvious when you start using the forum, felt a bit frustrated people were replying and seemed as though I wasn't bothered.
 
in fairness to the OP crops, it would be helpful if there could be a message generated to tell them.

We all have experience of being frustrated by IT not doing what it oughta! :)
 
Frustration.....



I ran out of bloody flour and honey...
Now thats frustration :thumbup:
 
Status
Not open for further replies.

Reply to Can't reply to my own thread... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
232
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
240
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
980
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
310
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
319
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock