Can't find refilling loop...

[Nw8926]

Can anyone tell me what type of boiler this is? It's lost it's pressure after the radiators needed bled. I can't find the loop to add more pressure, any ideas on where this could be
Surely it wouldn't be behind the tiles?

 

[jonnyswamp]

Check in old airing cupboard or cupboard under/to the side of boiler for a silver braided hose with a valve on it

 

[Masood]

Looks like a Biasi. The filling loop could be pretty much anywhere - I'd have a look in the cupboard below the boiler to start with. If not there, then no idea!

 

[Simon F]

the answer to the last question is
no it shouldn't be behind the tiles,
but anything is possible, happy hunting

 

[joni os]

Identify the cold water rising main at the boiler and follow it back to find fill loop. This will be at a point convenient to the flow and return pipework but not necessary near boiler. It would usually be where pressure gauge on boiler can be seen.

 

[townfanjon]

Probably behind the tiles , looks tight but can you get a mirror and try look behind the tiles

 

[Staffy85]

im only guessing but I would also say behind the tiles, if any of the grout lines around a tile is silicone then they might have left an access tile ? probably not , some people don't think .

 

[jonnyswamp]

It should look something like this