Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Can Anyone tell me what this flexi connector is? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

wild nomad

Hi there,

Can anyone tell me what this is? One end is connected to the tap the other connects to a water pipe. Some sort of filter? rusty.jpg

Thanks in advance :)
 
its a weihaven't been on site yet pal,it pulls the flex back down the tap spout

Ahhh. Yes that makes sense. I haven't been on site yet the customer sent me that picture. Must be one of those taps that you can pull out and direct manually. Cheers buddy :)
 
Status
Not open for further replies.

Reply to Can Anyone tell me what this flexi connector is? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
228
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
310
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
203
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
225
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
226
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock