Discuss Caleffi pressure reducing valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
I have a caleffi valve on my system. It has worked well for some 10 years. Recently I noticed it is not regulating, with no flow sits at mains pressure. With flow it regulates. Replaced cartridge but just the same. It is a Caleffi 5350, i.e a static regulator. Any ideas as to why performance has changed?
 
Time for a new one if it’s been good for 10 years
 

Reply to Caleffi pressure reducing valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
346
P
Hi All, I have replaced my existing Shaw and Mason chrome set with the Shaw and Mason forward bowl spindles/ Handles. I have kept the same tap or...
Replies
0
Views
288
PRJSyd
P
Hi - I have a Telford's Tristar Thermal store with a Caleffi 533..h PRV set to 3 bar. The PRV doesn't appear to be drop tight, so static rises...
Replies
2
Views
558
Hi all. As the title says, I have a problem with an unvented cylinder I had installed last year where the first time I turn a hot tap on after the...
Replies
27
Views
2K
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
563
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock