Discuss Brilliant filling loop valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Never had them pass before. Are you sure it is the valves and not just the levers not switching them off properly?
 
I have had the same problem, customer topping up after work from decoration, junk gets behind the valve when topping up and hay presto. You could get away with one but likely you will need both.
 
Definitely passing as when I disconnect the hose I got water coming from cold side and return side. Expensive they are
 
the knobs round off on these and only need need allen key to isolate iso valves
 
Status
Not open for further replies.

Reply to Brilliant filling loop valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days...
Replies
1
Views
212
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
301
PSxxxxxx
P
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
261
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
478
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock