Search the forum,

Braehead Glasgow .

Post new thread

Discuss Braehead Glasgow . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
quality

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
any of you lot nearby I'm here for the week if anyone fancies a pint
 
If your ever down my way in Essex..give me a shout and I'll join you....regards Turnpin:)
 
I will if and when it happens I've got loads coming up next one is Anglesey wales in June then back up here in Brechin in July. It's the isle man next week so it can all wait until after the TT
 
You get around a bit
 
Status
Not open for further replies.

Reply to Braehead Glasgow . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
246
PSxxxxxx
P
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
391
Chuck
C
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
334
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
176
Lou
Lou
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
163
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
BS 5389 Tiling Standards
Tilers Talk
Tiling Advice
Tilers' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock