Search the forum,

Discuss Boiler spares - who do you use in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
Looking to stock up some servicing bits, burner gaskets for vaillant, ideal logic etc
I dont live that close to any suppliers but there is a plumb centre about 30 mins away

Who do you use?
 
I use plumb base but if no one very close why not buy online.
 
Boiler spares is always a pain in the B/side, unless you keep to just a couple of makes you can have countless ÂŁs sitting around in the van, and you still won't have the part you need, Even suppliers don't have everything, and as long has you explain to customer most will wait for parts to arrive, in most cases it always means 2 visits.
 
Theres a few online ones who are quick . Be careful buying a stock of spares , because you know you will end up with them .

I am lucky theres a great bloke near me , but the online guys wipe the floor with his prices , hes expencive but his service is second to non.
 
Just orders a vaillant and ideal logic burner gasket off an eBay shop
 
Gas Appliance Spares, Preston. I have used them for donkeys, and are excellent.
any price they give over the phone is subject to a 20% discount for GS registration
 
Always found city heating spares really good, will post to my house next day, no charge and almost always the right bits... ;)
 
Status
Not open for further replies.

Reply to Boiler spares - who do you use in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
479
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock