Search the forum,

Boiler sizing

Post new thread

Discuss Boiler sizing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Hobo128

Hobo128

Gas Engineer
Messages
302
Can anyone recommend me a boiler sizing app. Got a huge house with loads of rads 4 bathroom, ufh and a 250 litre hot water cylinder. Can't find any decent apps to make it easy to size up
 
dont whole house size it either by mears calculator or mr combi heat loss calc

will take time but room by room

and cylinder sounds a bit small
 
and make sure mains are up to it if you have 4 folk in showers at the same time, just done this recently and ended up with a small booster set

[DLMURL]http://copperplumbing.org.uk/sites/default/files/content_attachments/pipe-sizing-basic-principles.pdf[/DLMURL]
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Boiler sizing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
260
oz-plumber
O
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
318
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
237
PSxxxxxx
P
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
264
oz-plumber
O
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
291
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Blog
Electrical Advice | Electricians Blog
UK Tiling Forums
TilersForums.co.uk
DIY Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock