Search the forum,

Discuss Baxi Bermuda 551 with strange hot water tank??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

c.gas

Plumbers Arms member
Plumber
Gas Engineer
Messages
165
Anyone shed any light on this system. Baxi Bermuda 551 which is apparently the first Bermuda made in 70's and there was only 1 tank upstairs which seems to have a built in header tank. In the main part of the tank had 2 cylinder tanks, 1 sticking out of the water and one at the bottom of the water which you can just about make out in the pictures. Couldn't find any pump or anything although it could be under the floor somewhere
 

Attachments

  • image.jpg
    image.jpg
    28.7 KB · Views: 41
Looks like an Elson, been quite a bit about those on here if you search it
 
I'd say its an Elson. Ripped a few out, which have been on older system. Seen a few in houses with one pipe systems, so worth checking that if your pricing for a new boiler/system
 
Apparantly the issue was it was bubbling over, when I was there you could see all water marks down the bedroom wall, looked like someone had been using a wall paper stripper in the room and the marks had dried with a slightly brown tinge. I think it's split inside as water coming out of the overflow when heating is on and it's a new ball valve. Also thinking thermostat on boiler aswel as water shouldn't have got that hot
 
Very dated system, I wouldn't be spending too much time on it.... If its split it's either some new tanks and a cylinder or new boiler time :smile5:
 
Elson diamond, almost guarantee the cold feed will be blocked! nice and heavy tho happy days!
 
Status
Not open for further replies.

Reply to Baxi Bermuda 551 with strange hot water tank??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
365
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
498
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock