Search the forum,

Discuss BAXI 105HE gasket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

plumbbobshan

Gas Engineer
Messages
79
Just a quick one Lads and Lasses, i need a gasket for the com chamber on a Baxi 105he as this one has become britle and cracked . Will i have to buy a door or can you get the gasket ?
Thanks
 
try this 5121749 SEAL FLUE - SECONDARY HEAT EXCHANGER (NOT SHOWN)

thats off the top off the round hex,to the flue
 
Last edited by a moderator:
5112389 front cover assembly large round gasket ,think this is the one your talking about
 
You can get the seal on their own, don't have a part number though. I remember pricing the door up, found the seals (can't remember how, may have been tech help) and thinking I should have just bought door- think there was 5-10 quid in it.
 
Status
Not open for further replies.

Reply to BAXI 105HE gasket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
407
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
183
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock