Helo, I'm needing help to identify a bath tap that needs a new cartridge. Its only identifying feature is HB on the tap body, in capitals. It is part of a three-part system, tap, spout and hand shower hose, that was installed in 2003. It is not Heritage Bathrooms. Any help please?
Discuss Bath tap identification in the USA area at PlumbersForums.net
- Messages
- 2
Hi everyone! A new home owner here and having leakage issues with taps. Could someone possibly help to identify the manufacturer? Both tap and shower are over 10 years old. It's a 4cm stock valve, which is non-standard and needs replacing
Attachments
Reply to Bath tap identification in the USA area at PlumbersForums.net
Similar plumbing topics
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix.
Last week the right hand hot tap makes...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...