Search the forum,

Bath tap identification

Post new thread

Discuss Bath tap identification in the USA area at PlumbersForums.net

M

MonkeyT

Messages
1
Helo, I'm needing help to identify a bath tap that needs a new cartridge. Its only identifying feature is HB on the tap body, in capitals. It is part of a three-part system, tap, spout and hand shower hose, that was installed in 2003. It is not Heritage Bathrooms. Any help please?
 

Attachments

  • HB Bath tap2.jpg
    HB Bath tap2.jpg
    49.2 KB · Views: 17
  • HB Bath tap3.jpg
    HB Bath tap3.jpg
    33.8 KB · Views: 16
Hi everyone! A new home owner here and having leakage issues with taps. Could someone possibly help to identify the manufacturer? Both tap and shower are over 10 years old. It's a 4cm stock valve, which is non-standard and needs replacing
 

Attachments

  • WhatsApp Image 2021-09-15 at 12.43.26 (1).jpeg
    WhatsApp Image 2021-09-15 at 12.43.26 (1).jpeg
    156.6 KB · Views: 7
  • WhatsApp Image 2021-09-15 at 12.43.26 (2).jpeg
    WhatsApp Image 2021-09-15 at 12.43.26 (2).jpeg
    85.8 KB · Views: 4
  • WhatsApp Image 2021-09-15 at 12.43.26 (3).jpeg
    WhatsApp Image 2021-09-15 at 12.43.26 (3).jpeg
    84.8 KB · Views: 5
  • WhatsApp Image 2021-09-15 at 12.43.26.jpeg
    WhatsApp Image 2021-09-15 at 12.43.26.jpeg
    130.6 KB · Views: 6

Reply to Bath tap identification in the USA area at PlumbersForums.net

Similar plumbing topics

C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
227
DIwhYdidIstartThis
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
292
oz-plumber
O
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock