Search the forum,

Discuss Bath Drain Tool ! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Mike555

Hi

Is the a special tool to tighten and loosen this drain fitted to a bath?

All the screwdrivers I have that are wide and will reach the two slots are to thick to go in them.


Mike
 

Attachments

  • slots.JPG
    slots.JPG
    24 KB · Views: 161
I use a wood chisel.

Mind you the wood chisel I use would not chisel wood.
It's a Plumbers chisel - used for anything - except chiselling wood.
Works great for the application you require.

Try that!!!!
 
20p coin held in a pair of pliers.

Or for Yorkshiremen, a penny pinched between the fingers...
 
20p coin held in a pair of pliers.

Or for Yorkshiremen, a penny pinched between the fingers...

Would that be the 'fabled' first penny their ever earned....
....God Forbid......
.....I was led to believe that was to be framed!
 
It's a little known fact that copper wire was invented by two Yorkshireman fighting over a penny...
 
Plumbers chisel for the win, bath wastes, strainer wastes, bosting holes in things and general wedging
 
Another wood chisel user here.
 
Status
Not open for further replies.

Reply to Bath Drain Tool ! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
241
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
133
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
224
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock