Discuss Anyone interested in helping with an article in the Gas Safe magazine? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

GasSafePR

Hello all

Those of you who read the Registered Gas Engineer magazine may have spotted an article in the latest (Feb 2012) issue talking about what happens when you are contacted by Gas Safe Register to arrange an inspection.
The article talks about the 'hows and whys' of the inspection process and helps to set the record straight on what happens in the process. It's a topic that comes up here on the boards quite often so I think it is worth a read.

We are also looking at writing up a piece from the other side of the fence - what is it like for you to be inspected? Was it explained to you why your work was selected, did you attend? Was it more or less detailed than you expected?

If you would like to give your take on the experience we would be really happy to hear from you, and if you are happy to share your story but would rather your name wasn't used then that is OK too - we really just want your perpective on things.

If you might be interested then PM me and we can discuss.

Cheers

GasSafePR
 
Hello all

Many thanks to those who have come forward to offer their views on the inspection process and to contribute to the article in an upcoming edition of Registered Gas Engineer.

We are currently putting together the March edition and when that is sent off to print we will start working on this piece so it may be week or two before we follow up - but don't worry, we haven't forgotten you.

And of course if anyone else wants to add their tuppence worth too then PM me and we will add you to the mix.

Cheers

GasSafePR
 
hate to say it but ive got a few gas safe mags still in the plastic rappers . will they become more collectable that way ?
 
Status
Not open for further replies.

Reply to Anyone interested in helping with an article in the Gas Safe magazine? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
240
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock