Search the forum,

Discuss Another how to get the top off tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

DeeplyDrippy

Hi all any idea how to get the cover off this tap? If it is unscrew, is it anti clockwise on both?


And once I do, to stop dripping, do I simply fit a new valve? Its a quarter turn tap s is ceramic washer I believe?

Thanks
 

Attachments

  • basin taps.jpg
    basin taps.jpg
    41.7 KB · Views: 31
It is likely that the top chrome dome just unscrews, someone mentioned a rubber glove to help help friction in another post - something I hadn't thought of before ;)
If the tap's been in for years it might be difficult. Yes they will screw off anti clockwise. (lefty loosy)
Once you have access to the cartridge, take it to a plumbing merchants to get an exact replacement. Take the part of the tap that fits into the thin spline of the cartridge with you to make finding the right spline easier.
Let us know how you get on.
 
Status
Not open for further replies.

Reply to Another how to get the top off tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
3
Views
143
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
232
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
339
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock