Search the forum,

Discuss Alternative for Drayton SM1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Deleted member 56158

Evening all, looking for an alternative for the above 24hr mechanical timeclock, Drayton is pricy for a basic clock. Unable to change wiring box layout because of proximity to consumer box. Thanks.
 
drayton lifestyle
 
Sorry it's got to be mechanical, long term tenants unable to use digital clocks.
 
Sorry it's got to be mechanical, long term tenants unable to use digital clocks.

any reason as once set there no need to change it (hour change is automatic) etc

but fair enough

drayton switchmaster
 
Last edited:
Reason for being mechanical only is the tenant is partially sighted, also clocks changing isn't a problem for her. Thank you for your help.
 
Status
Not open for further replies.

Reply to Alternative for Drayton SM1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
208
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
252
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
496
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
255
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock